KT15 submersible drilling machine and screw air compressor work together

 

In the field of modern engineering construction, especially in scenarios such as open-pit mining, water well drilling, and construction aggregate mining, the efficiency and stability of drilling operations directly determine the progress and benefit of the entire project. Among numerous drilling equipment combinations, the cooperative work of KT15 submersible drilling machine and screw air compressor has become a classic matching mode, which not only gives full play to the performance advantages of each equipment but also achieves a 1+1>2 operation effect, solving the pain points of low efficiency and poor stability in traditional drilling operations.

The KT15 submersible drilling machine is a high-performance drilling equipment specially designed for complex working conditions such as high altitude, high terrain, and various stratum environments. It has the characteristics of low fuel consumption, high penetration rate, and long service life, and can easily cope with stratum with rock hardness F=6-20, with a drilling diameter of 135-190mm and a nominal drilling depth of up to 35 meters when the drilling rod is automatically added or unloaded. As a core component of the drilling system, the KT15 submersible drilling machine relies on its powerful 298kW power system and 65kN pulling and pushing force to realize efficient rock breaking and drilling, but its stable operation is inseparable from the continuous and stable air source support provided by the screw air compressor.

The screw air compressor, as the "power heart" of the KT15 submersible drilling machine, undertakes the important task of providing high-pressure and stable air flow for the drilling process. Different from traditional air compressors, the screw air compressor adopts a high-efficiency rotor profile and two-stage compression design, which can output continuous and stable compressed air with low noise and low energy consumption. For the KT15 submersible drilling machine, which requires 2.4MPa working air pressure and 20m³/min air consumption, the screw air compressor can perfectly match its air demand, ensuring that the DTH hammer of the drilling machine can continuously break rock and discharge slag, avoiding drilling jamming caused by insufficient air pressure or unstable air flow.

The cooperative work of KT15 submersible drilling machine and screw air compressor is a scientific and efficient operation mode that complements each other. When the project starts, the screw air compressor is first started to preheat and reach the rated working pressure, providing a stable air source for the KT15 submersible drilling machine in advance. Then, the KT15 submersible drilling machine is deployed to the designated drilling position, and the drilling angle is adjusted according to the construction requirements (the drilling boom can be adjusted within a wide range, with a downward inclination angle of 54° and an upward inclination angle of 26°). During the drilling process, the screw air compressor continuously delivers high-pressure clean air to the drilling rod and DTH hammer of the KT15 submersible drilling machine. The high-pressure air drives the DTH hammer to strike the rock at high frequency, while blowing the broken rock slag out of the drill hole in time, ensuring the smooth progress of drilling.

In practical application scenarios such as open-pit mining and water well drilling, the advantages of the cooperative work of KT15 submersible drilling machine and screw air compressor are more prominent. For example, in the water well drilling project in remote rural areas, the KT15 submersible drilling machine can adapt to the harsh terrain with its flexible mobility and strong stratum adaptability, while the portable screw air compressor can be easily transported and deployed in narrow and uneven access roads, providing stable power support for the drilling machine. In the open-pit mining of cement, marble, and limestone, the combination of the two can significantly improve the drilling efficiency, reduce the downtime caused by equipment failure, and effectively control the construction cost.

In addition, the screw air compressor is equipped with a triple filtration system, including a maintenance-free centrifugal air pre-filter, a cyclone main air filter, and a safety filter, which can filter more than 90% of dust and impurities, ensuring that the compressed air delivered to the KT15 submersible drilling machine is clean and free of impurities, thus extending the service life of the drilling machine's internal components and reducing maintenance costs. At the same time, the KT15 submersible drilling machine is equipped with a reliable hydraulic control system and an ergonomic operating environment, which can cooperate with the stable output of the screw air compressor to realize continuous and efficient operation, further improving the overall construction efficiency.

With the continuous development of engineering construction technology, the requirements for drilling efficiency, stability, and energy conservation are getting higher and higher. The cooperative work of KT15 submersible drilling machine and screw air compressor not only meets the needs of modern engineering construction but also sets a model for the efficient matching of drilling equipment. Whether it is the high-intensity operation of open-pit mining or the precise construction of water well drilling, this combination can give full play to its performance advantages, help the construction unit complete the project efficiently and with high quality, and create greater economic benefits.

https://www.groupkaishan.com/hangye/277.html